Cabletron Systems DLE22-MA, DLE33-MA, DLE32-MA, DLE23-MA manual Entering a New Screen Refresh Time

General Configuration Screen

3.Press ENTER to set the system clock to the time in the input field.

4.Use the arrow keys to highlight the SAVE command at the bottom of the screen and press ENTER.

If the time entered is a valid format, the Event Message Line at the top of the screen displays “SAVED OK”. If the entry is not valid, Local Management does not alter the current value and refreshes the Module Time field with the previous value.

5.15.7 Entering a New Screen Refresh Time

The screen refresh time is set from 3 to 99 seconds with a default of 3 seconds. To set a new screen refresh time, perform the following steps:

1.Use the arrow keys to highlight the Screen Refresh Time field.

2.Enter a number from 3 to 99.

3.Press ENTER to set the refresh time to the time entered in the input field.

4.Use the arrow keys to highlight the SAVE command at the bottom of the screen and press ENTER.

If the time entered is within the 3 to 99 seconds range, the Event Message Line at the top of the screen displays “SAVED OK”. If the entry is not valid, Local Management does not alter the current setting, but it does refresh the Screen Refresh Time field with the previous value.

5.15.8 Setting the Screen Lockout Time

The screen lockout time can be set from 1 to 30 minutes with a default of

15 minutes. To set a new lockout time, perform the following steps:

1.Use the arrow keys to highlight the Screen Lockout Time field.

2.Enter a number from 1 to 30.

3.Press ENTER to set the lockout time in the input field.

4.Use the arrow keys to highlight the SAVE command at the bottom of the screen and press ENTER.

DLE22-MA,DLE32-MA,DLE23-MA and DLE33-MA User’s Guide 5-45