Chapter 5: Local Management

4.Press ENTER. The message “SAVED OK” is displayed.

5.26.2 Setting the Reset Peak Switch

To set the Reset Peak Switch field to YES or NO, proceed as follows:

1.Use the arrow keys to highlight the Reset Peak field for the selected port.

2.Press the SPACE bar to select YES or 3NO.

3.Use the arrows keys to highlight the SAVE command at the bottom of the screen.

4.Press ENTER. The message “SAVED OK” is displayed.

5.27MODULE STATISTICS MENU SCREEN

The Module Statistics Menu screen, Figure 5-32, provides access to screens that allow the user to obtain switch statistics about frame traffic through each interface, to view MIB-II statistics from each interface, and to view RMON Statistics gathered by the RMON agent embedded in the DLE2X-MA and DLE3X-MA.

Access the Module Statistics Menu from the Module Menu screen by using the arrow keys to highlight the MODULE STATISTICS menu item and pressing ENTER. The Module Statistics Menu screen displays.

5-88 DLE22-MA,DLE32-MA,DLE23-MA and DLE33-MA User’s Guide

Page 152
Image 152
Cabletron Systems DLE33-MA, DLE22-MA, DLE32-MA, DLE23-MA manual Setting the Reset Peak Switch, Module Statistics Menu Screen