Cabletron Systems DLE22-MA, DLE33-MA High Speed Interface Configuration Menu Screen DLE2X-MA Only

High Speed Interface Configuration Menu Screen (DLE2X-MA Only)

Event Message Line
	MS 700 LOCAL MANAGEMENT
	High Speed Interface Configuration
Module Type: DLE22-MA		Firmware Revision: XX.XX.XX
Slot Number: X		BOOTPROM Revision: XX.XX.XX
	Port 25	Port 26
Port Type	DELTX-UI	Unknown
Link Status	Link	No Link
Current Oper. Mode	100Base-TXFD	[N/A]
Desired Oper. Mode	[Auto-Negotiation]	[N/A]
Advertised Ability	[100Base-TXFD] [Disabled]	[N/A]
SAVE	EXIT		RETURN

LKG-10858-98F

Figure 5-28 High Speed Interface Configuration Screen for the DLE2X-MA

The following briefly explains each field of the High Speed Interface Configuration screen.

Port Type (Read-Only)

Displays the name of the interface (DELFX-UI, DELTX-UI or DELF3-UI) installed in ports 25 and 26. Figure 5-28 shows that there is an DELTX-UI interface installed in port 25 and no interface, indicated by Unknown, in Port 26.

Link Status (Read-Only)

Indicates whether or not there is a physical connection from this port to another 10BASE-F or 100BASE-TX/FX device. One of the following values is displayed:

•Link – There is a link signal present and a valid physical connection to another 10BASE-F or 100BASE-TX/FX device.

•No Link – There is no link signal present and there is no valid physical connection to another device.

DLE22-MA,DLE32-MA,DLE23-MA and DLE33-MA User’s Guide 5-73