Cabletron Systems DLE32-MA, DLE33-MA, DLE22-MA, DLE23-MA manual Broadcast Suppression Screen

Chapter 5: Local Management

5.26BROADCAST SUPPRESSION SCREEN

The Broadcast Suppression screen, Figure 5-31, allows the user to set a desired limit of receive broadcast frames per port per second.

The Broadcast Suppression screen may not be available if the operational mode of the module has been set to 802.1Q SWITCHING. Refer to your Release Notes to see what operational modes support Broadcast Suppression. Refer to Section 5.15.9, Setting the Operational Mode, for instructions on configuring the operational mode of the module.

Any broadcast frames received above the desired threshold will be dropped.

Access the Broadcast Suppression screen from the Module Specific Configuration screen by using the arrow keys to highlight the BROADCAST SUPPRESSION menu item and pressing ENTER. The Broadcast Suppression screen displays.

Event Message Line

			MS 700 LOCAL MANAGEMENT
			Broadcast Suppression
Module Type: DLE22-MA				Firmware Revision: XX.XX.XX
Slot Number: X				BOOTPROM Revision: XX.XX.XX
PORT #	Total RX	Peak Rate	Time Since Peak	Threshold	Reset Peak
1	12345678910	150000	999:23:59	150000	[NO]
2	12345678910	150000	999:23:59	150000	[NO]
3	12345678910	150000	999:23:59	150000	[NO]
4	12345678910	150000	999:23:59	150000	[NO]
5	12345678910	150000	999:23:59	150000	[NO]
6	12345678910	150000	999:23:59	150000	[NO]
7	12345678910	150000	999:23:59	150000	[NO]
8	12345678910	150000	999:23:59	150000	[NO]
9	12345678910	150000	999:23:59	150000	[NO]
10	12345678910	150000	999:23:59	150000	[NO]
11	12345678910	150000	999:23:59	150000	[NO]
12	12345678910	150000	999:23:59	150000	[NO]
						RETURN
	SAVE		EXIT	[13-24]		RETURN

LKG-10861-98F

Figure 5-31 Broadcast Suppression Screen

5-86 DLE22-MA,DLE32-MA,DLE23-MA and DLE33-MA User’s Guide