Overview Installation Troubleshooting Contact FAQ Specifications Glossary License
Configuration: Basic Gateway TCP/IP Wireless Print Server USB
Gateway > PORT FORWARDING — config Page
Use this page to configure up to 32 virtual servers:
Gateway > PORT FORWARDING — config page fields
Field | Description |
ADD NEW PORT | You can configure up to 32 virtual servers. |
FORWARDING ENTRY |
|
Template | If you select Custom, you must set the Name, Port Start, Port End, and LAN IP Address. |
| If you select a predefined template such as HTTP or FTP, the Name, Port Start, Port End |
| values are provided. You only need to enter LAN IP Address and change default values only |
| if necessary. |
Name | Type a unique identifier for the custom virtual server. The typical practice is to use the |
| protocol as a unique identifier (for example “ftp”). |
Port Start | Sets the LAN internal interface port or the start of a port range. Inbound Internet connection |
| requests are statically mapped to this port. |
Port End | If a range of ports is required, sets the end of the port range. |
LAN IP Address | Sets the private LAN IP address for the port forwarding page. An Internet user must know the |
| public IP address to access any port forwarding entry you define on the private LAN. |
Enable | Check this box to enable the port forwarding entries to be accessed through NAT. |
Add | Click to add the virtual server to the PORT FORWARDING list. |
PORT FORWARDING | Displays the configured custom virtual servers. |
Home Print
X | 52 | SBG1000 User Guide |
Exit |
|
|
