ADS Technologies SBG1000 manual Installation, Before You Begin, Cd-Rom

Overview Installation Troubleshooting Contact FAQ Specifications Glossary License

Configuration: Basic Gateway TCP/IP Wireless Print Server USB

Installation

The following subsections provide information about installing the SBG1000 hardware:

•

•

•

•

•

•

•

•

•

•

•

Before You Begin

Precautions

Signing Up for Service

Computer System Requirements

Connecting the SBG1000 to the Cable System

Cabling the LAN

Obtaining an IP Address for Ethernet

Connecting a PC to the USB Port

Connecting the Printer

Wall Mounting

Installing the Optional External Diversity Antenna

For information about wireless LAN setup, see “Setting Up the Wireless LAN”.

Before You Begin

Before you begin the installation, check that you received the following items with your SBG1000:

Item	Description
Power cord	Connects the SBG1000 to the AC electrical outlet
10/100Base-T	Connects to the Ethernet port
Ethernet cable
USB cable	Connects to the USB port
Phone wire jumper with	Connects to a telephone line used for the HPNA network
RJ-11 connectors
SBG1000 Installation	Contains this User Guide and USB drivers
CD-ROM

You will need 75-ohm coaxial cable with F-type connectors to connect the SBG1000 to the nearest cable outlet. If a TV is connected to the cable outlet, you may need a 5 to 900 MHz RF splitter and two additional coaxial cables to use both the TV and the SBG1000.

Home Print

X	20	SBG1000 User Guide
Exit