Overview Installation Troubleshooting Contact FAQ Specifications Glossary License
Configuration: Basic Gateway TCP/IP Wireless Print Server USB
Gateway > WAN Page
Use this page to configure the external (public) wide area network (WAN) interface:
Gateway > WAN page fields
Field | Description |
Host Name | If the cable provider requires a hostname to access to their network, type the hostname they |
| provided in this field. The default is None. |
Enable DHCP Client | Enabling the DHCP client causes the wireless gateway to automatically obtain the public IP |
| address, subnet mask, domain name, and DNS server(s). Most commonly, the DHCP client is |
| enabled if the cable provider automatically assigns a public IP address from their DHCP server. |
| Enable DHCP Client is on by default. |
Disable DHCP Client | If the cable provider does not automatically assign a public IP address using DHCP, they must |
| provide a static IP address. Select Disable DHCP Client. When you disable the DHCP client, |
| you must type the static IP address, subnet mask, DNS server(s), and domain name (if |
| necessary) in the fields provided. Disable DHCP Client is off by default. |
Static IP Address | If Disable DHCP Client is on, type the static IP address provided by the cable provider, in |
| |
Static IP Subnet Mask | If Disable DHCP Client is on, type the subnet mask associated with the static IP address, in |
| |
WAN Default Gateway | When using a statically assigned IP address from your ISP, enter the default gateway the SBG |
| should be using to communicate with on the WAN. |
Home |
X | 46 | SBG1000 User Guide |
Exit |
|
|
