Overview Installation Troubleshooting Contact FAQ Specifications Glossary License
Configuration: Basic Gateway TCP/IP Wireless Print Server USB
Gateway > LAN — nat config Page
Use this page to enable NAT and add clients to the CURRENT NAT PASSTHROUGH list:
Gateway > LAN — nat config page fields
Field or Button
LAN
Enable NAT
Apply
NEW NAT PASSTHROUGH
MAC Address
Bypass Firewall (True DMZ)
Add
CURRENT NAT PASSTHROUGH
Delete
Home |
Description
If enabled, the single HFC IP Address (public IP address) assigned by the cable provider is mapped to many private IP addresses on the SBG1000 LAN.
Click to apply your changes. You must reboot the SBG1000.
Specifies up to 32 computers as passthrough clients not subject to NAT, using their MAC addresses.
Type the passthrough client MAC address. The format is 16 hexadecimal numerals.
Check this box to set the NAT passthrough computer as a DMZ client. Use this setting with extreme caution because a DMZ client is completely open to Internet hackers.
Click to add the MAC address to the CURRENT NAT PASSTHROUGH list. Lists the computers on the LAN that are configured for NAT passthrough.
Click to delete the selected MAC address from the NAT passthrough list.
X | 48 | SBG1000 User Guide |
Exit |
|
|
