Overview Installation Troubleshooting Contact FAQ Specifications Glossary License
Configuration: Basic Gateway TCP/IP Wireless Print Server USB
Determine the connection types you will make to the SBG1000. Check that you have the required cables, adapters, and adapter software. You may need:
Wireless LAN | An IEEE 802.11b wireless adapter and driver software for each computer having a wireless |
| connection (see “Optional Accessories”) |
Ethernet LAN | Ethernet cables and network interface cards (NICs) with accompanying installation software |
| To connect more than five computers to the SBG1000, one or more Ethernet hubs or switches |
USB | A USB cable and the SBG1000 Installation |
HPNA LAN | Telephone jumper cables |
| An HPNA adapter and driver software for each computer connected using HPNA |
Printer | A printer cable |
If you are installing the optional Motorola External Diversity Antenna, you may need a pair of needle nose pliers.
Coaxial cable, RF splitters, hubs, and switches are available at consumer electronic stores.
Precautions
Postpone SBG1000 installation until there is no risk of thunderstorm or lightning activity in the area.
To avoid damaging the SBG1000 or computers with static electricity:
Always first connect the coaxial cable to the grounded cable TV wall outlet.
Before you connect or disconnect the USB or Ethernet cable from the SBG1000 or PC, always touch the coaxial cable connector on the SBG1000 to release any static charges.
To avoid potential shock, always unplug the power cord from the wall outlet or other power source before disconnecting it from the SBG1000 rear panel.
To prevent overheating the SBG1000, do not block the ventilation holes on the bottom of the unit.
Do not open the unit. Refer all service to your cable provider.
Wipe the unit with a clean, dry cloth. Never use cleaning fluid or similar chemicals. Do not spray cleaners directly on the unit or use forced air to remove dust.
Home Print
X | 21 | SBG1000 User Guide |
Exit |
|
|
