ADS Technologies SBG1000 manual Setting Up a USB Driver in Windows Me, 116

Overview Installation Troubleshooting Contact FAQ Specifications Glossary License

Configuration: Basic Gateway TCP/IP Wireless Print Server USB

Setting Up a USB Driver in Windows Me

1Insert the SBG1000 Installation CD-ROM in the CD-ROM drive. This CD contains the USB drivers and must be inserted and read by the PC before you connect the SBG1000 to the PC.

2Connect the USB cable as shown in USB Connection.

A few seconds after you complete the USB connection, the Add New Hardware Wizard window is displayed:

3Click Next. Windows automatically searches for the correct USB drivers and installs them. If the installation is successful, the following window is displayed:

Although your SBG1000 model number may be different than in the images in this guide, the procedure is the same.

4If the window above is displayed, click Finish. Otherwise, be sure the SBG1000 Installation CD-ROM is correctly inserted in the CD-ROM drive.

When you finish setting up the USB driver, you can continue with “Configuring TCP/IP”.

Home Print

X	116	SBG1000 User Guide
Exit