
Cisco IOS Voice, Video, and Fax Commands: R Through Sh
sgcp
sgcp max-waiting-delay
To set the Simple Gateway Control Protocol (SGCP) maximum waiting delay to prevent restart avalanches, use the sgcp
sgcp
no sgcp
Syntax Description | delay | Sets the maximum waiting delay (MWD) value in milliseconds. The |
|
| valid range is from 0 to 600,000. The default is 3000. |
|
|
|
Defaults
Command Modes
Command History
3,000 milliseconds
Global configuration
Release | Modification |
12.0(5)T | This command was introduced in a private release on the Cisco AS5300 |
| universal access server only, and was not generally available. |
|
|
12.0(7)XK | Support for this command was extended to the Cisco MC3810 |
| multiservice concentrator and the Cisco 3600 series routers (except for |
| the Cisco 3620) in a private release that was not generally available. |
|
|
12.1(2)T | This command was integrated into 12.1(2)T and was generally available |
| on the Cisco 3600 series router and the Cisco MC3810 multiservice |
| concentrator |
|
|
Examples |
| The following example shows the maximum wait delay value set to 40 milliseconds: | |
|
| sgcp |
|
|
|
|
|
Related Commands |
| Command | Description |
|
|
|
|
|
| sgcp | Starts and allocates resources for the SGCP daemon. |
|
|
|
|
|
| sgcp | Defines the IP address of the default SGCP call agent. |
|
|
|
|
|
| sgcp | Gracefully terminates all SGCP activity. |
|
|
|
|
|
| sgcp modem passthru | Enables SGCP modem or fax |
|
|
|
|
|
| sgcp | Disables the SGCP quarantine buffer. |
|
| disable |
|
|
|
|
|
|
| sgcp request retries | Specifies the number of times to retry sending “notify” and “delete” |
|
|
| messages to the SGCP call agent. |
|
|
|
|
|
| sgcp request timeout | Specifies how long the system should wait for a response to a request. |
|
|
|
|
Cisco IOS Voice, Video, Fax Command Reference