Cisco Systems VR-561 manual Field Description, VR-710

Cisco IOS Voice, Video, and Fax Commands: R Through Sh

show dial-peer voice

Successful Calls = 0, Failed Calls = 0

Accepted Calls = 0, Refused Calls = 0

Last Disconnect Cause is “”

Last Disconnect Text is “”

Last Setup Time = 0

The following is sample output from the show dial-peer voice command for a VoIP dial peer: Router# show dial-peer voice 10

VoiceOverIpPeer10

tag = 10, dest-pat = `', incall-number = `+14087',

group = 0, Admin state is up, Operation state is down Permission is Answer,

type = voip, session-target = `', sess-proto = cisco, req-qos = bestEffort, acc-qos = bestEffort,

fax-rate = voice, codec = g729r8,

Expect factor = 10,Icpif = 30, VAD = disabled, Poor QOV Trap = disabled, Connect Time = 0, Charged Units = 0

Successful Calls = 0, Failed Calls = 0

Accepted Calls = 0, Refused Calls = 0 Last Disconnect Cause is “”

Last Disconnect Text is “” Last Setup Time = 0

Table 35 provides an alphabetical listing of the show dial-peer voice output fields and a description of each field.

Table 35	show dial-peer voice Field Descriptions
Field		Description
Accepted Calls		Number of calls accepted from this peer since system startup.
acc-qos		Lowest acceptable quality of service configured for calls for this peer.
Admin state		Administrative state of this peer.
answer-address		Answer address configured for this dial peer.
Charged Units		Total number of charging units applying to this peer since system
		startup. The unit of measure for this field in hundredths of a second.
codec		Default voice coder rate of speech for this peer.
Connect Time		Accumulated connect time to the peer since system startup for both
		incoming and outgoing calls. The unit of measure for this field is in hun-
		dredths of a second.
dest-pat		Destination pattern (telephone number) for this peer.
DTMF Relay		Indicates whether or not dual-tone multifrequency (DTMF) relay has
		been enabled, by using the dtmf-relaycommand, for this dial peer.
Expect factor		User-requested Expectation Factor of voice quality for calls through this
		peer.
fax-rate		Fax transmission rate configured for this peer.
Failed Calls		Number of failed call attempts to this peer since system startup.
group		Group number associated with this peer.

Cisco IOS Voice, Video, Fax Command Reference

VR-710