Cisco Systems VR-561 manual Settlement, Communication exchange is completed, VR-620

Cisco IOS Voice, Video, and Fax Commands: R Through Sh

settlement

settlement

To enter settlement configuration mode and specify the attributes specific to a settlement provider, use the settlement command in global configuration mode. To disable the settlement provider, use the no form of this command.

settlement provider-number

no settlement provider-number

Syntax Description	provider-number	Specifies a digit that defines a particular settlement server. The only valid
		entry is 0.

Defaults

Command Modes

Command History

0

Global configuration

Release	Modification
12.0(4)XH1	This command was introduced on the Cisco 2600 series and Cisco 3600
	series routers and on the Cisco AS5300 universal access server.
12.1(1)T	This command was integrated into Cisco IOS Release 12.1(1)T.

Usage Guidelines	The variable provider-numberdefines a particular settlement provider. For Cisco IOS Release 12.1, only
	one clearinghouse per system is allowed, and the only valid value for provider-numberis 0.
Examples	This example shows how to enter settlement configuration mode:
	settlement 0
Related Commands	Command	Description
	connection-timeout	Configures the length of time for which a connection is maintained after a
		communication exchange is completed.
	customer-id	Identifies a carrier or ISP with a settlement provider.
	device-id	Specifies a gateway associated with a settlement provider.
	encryption	Sets the encryption method to be negotiated with the provider.
	max-connection	Sets the maximum number of simultaneous connections to be used for
		communication with a settlement provider.
	response-timeout	Configures the maximum time to wait for a response from a server.
	retry-delay	Sets the time between attempts to connect with the settlement provider.
	retry-limit	Sets the connection retry limit.

Cisco IOS Voice, Video, Fax Command Reference

VR-620