Cisco Systems VR-561 manual Following example delivers fax-mail to multiple recipients, VR-608

Cisco IOS Voice, Video, and Fax Commands: R Through Sh

session target (VoATM)

Command History	Release	Modification
	11.3(1)T	This command was introduced.
	11.3(1)MA	Support was added for VoATM, VoHDLC, and POTS dial peers on the
		Cisco MC3810 multiservice concentrator.
	12.0(7)XK	Support was added for VoATM dial peers on the Cisco 3600 series
		routers. Support for VoHDLC on the Cisco MC3810 multiservice
		concentrator was removed.
	12.1(2)T	Support was added for VoATM on Cisco MC3810 multiservice
		concentrators.
	Use the session target command to specify a network-specific address or domain name for a dial peer.
Usage Guidelines
	Whether you select a network-specific address or a domain name depends on the session protocol you
	select. The syntax of this command complies with the simple syntax of mailto: as described in RFC 1738.
	The session target loopback command is used for testing the voice transmission path of a call. The
	loopback point will depend on the call origin and the loopback type selected.
	This command applies to on-ramp store-and-forward fax functions.
	You must enter the session protocol aal2-trunkdial-peer configuration command before you can
	specify a cid for a dial peer for VoATM on the Cisco MC3810 multiservice concentrator.
Note	This command does not apply to plain old telephone service (POTS) dial peers.
Examples	The following example configures a session target for Voice over ATM on a Cisco MC3810 multiservice
	concentrator. The session target is sent to ATM interface 0, and for a PVC with a VCI of 20.

dial-peer voice 12 voatm destination-pattern 13102221111 session target atm0 pvc 20

The following example delivers fax-mail to multiple recipients:

dial-peer voice 10 mmoip

session target marketing-information@mailer.example.com

Assuming that mailer.example.com is running sendmail, you can put the following information into its /etc/aliases file:

marketing-information: john@example.com, fax=+14085551212@sj-offramp.example.com

The following example displays configuring a session target for Voice over ATM on the Cisco 3600 series. The session target is sent to ATM interface 0, and is for a PVC with a VPI/VCI of 1/100.

dial-peer voice 12 voatm destination-pattern 13102221111 session target atm1/0 pvc 1/100

Cisco IOS Voice, Video, Fax Command Reference

VR-608