Cisco Systems VR-561 manual Packetization period parameter setting for the mgcp codec, VR-743

Cisco IOS Voice, Video, and Fax Commands: R Through Sh

show mgcp

Table 46 describes the significant fields shown in the display.

Table 46 show mgcp Field Descriptions

MGCP Admin State...Oper	The administrative and operational state of the MGCP daemon. The
State	administrative state controls starting and stopping the application
	using the mgcp and mgcp block-newcallscommands. The
	operational state controls normal MGCP operations.
MGCP call-agent	The address of the call agent specified in the mgcp command.
Initial protocol service is...	Indicates the protocol initiated for this session.
MGCP block-newcalls	The state of the mgcp block-newcallscommand.
enabled
MGCP dtmf-relay	The setting for the mgcp dtmf-relaycommand.
MGCP modem passthru	Indicates whether a call agent will be involved in relaying modem
	data.
MGCP request timeout	The setting for the mgcp request timeout command.
MGCP request retries	The setting for the mgcp request retries command.
MGCP gateway port	The UDP port specification.
MGCP maximum waiting	The setting for the mgcp max-waiting-delaycommand.
delay
MGCP restart delay	The setting for the mgcp restart-delaycommand.
MGCP vad	The setting for the mgcp vad command.
MGCP sdp simple	Indicates whether the simple sdp protocol is being used.
MGCP cisco fgdos	For Cisco use only.
MGCP codec type	The setting for the mgcp codec command.
MGCP packetization period	The packetization period parameter setting for the mgcp codec
	command.
MGCP JB threshold lwm	The jitter buffer minimum threshold parameter setting for the mgcp
	quality-threshold command.
MGCP JB threshold hwm	The jitter buffer maximum threshold parameter setting for the mgcp
	quality-threshold command.
MGCP LAT threshold lwm	The latency minimum threshold parameter setting for the mgcp
	quality-threshold command.
MGCP LAT threshold hwm	The latency maximum threshold parameter setting for the mgcp
	quality-threshold command.
MGCP PL threshold lwm	The packet loss minimum threshold parameter setting for the mgcp
	quality-threshold command.
MGCP PL threshold hwm	The packet loss maximum threshold parameter setting for the mgcp
	quality-threshold command.
MGCP playout mode	The jitter buffer packet size type and size.
MGCP IP ToS low delay	The low-delayparameter setting for the mgcp ip-toscommand.
MGCP IP ToS high	The high-throughputparameter setting for the mgcp ip-tos
throughput	command.

Cisco IOS Voice, Video, Fax Command Reference

VR-743