Cisco Systems VR-561 manual Retry-delay number no retry-delay, Response-timeout, VR-571

Cisco IOS Voice, Video, and Fax Commands: R Through Sh

retry-delay

retry-delay

To set the time between attempts to connect with the settlement provider, use the retry-delaycommand in settlement configuration mode. To restore the default value, use the no form of this command.

retry-delay number no retry-delay

Syntax Description	number	Length of time (in seconds) between attempts to connect with the settlement
		provider. The valid range for retry delay is from 1 to 600 seconds.

Defaults

Command Modes

Command History

The default retry delay is two seconds.

Settlement configuration

Release	Modification
12.0(4)XH1	This command was introduced on the Cisco 2600 and 3600 series routers and
	the Cisco AS5300 universal access server.
12.1(1)T	This command was integrated into Cisco IOS Release 12.1(1)T.

Usage Guidelines	After exhausting all service points for the provider, the router is delayed for the specified length of time
	before resuming connection attempts.
Examples	The following example sets a retry value of 15 seconds:
	settlement 0
	relay-delay 15
Related Commands	Command	Description
	connection-timeout	Configures the time for which a connection is maintained after completion
		of a communication exchange.
	customer-id	Identifies a carrier or ISP with a settlement provider.
	device-id	Specifies a gateway associated with a settlement provider.
	encryption	Sets the encryption method to be negotiated with the provider.
	max-connection	Sets the maximum number of simultaneous connections to be used for
		communication with a settlement provider.
	response-timeout	Configures the maximum time to wait for a response from a server.
	retry-limit	Sets the maximum number of attempts to connect to the provider.

Cisco IOS Voice, Video, Fax Command Reference

VR-571