Cisco Systems VR-561 manual Displays general Mgcp configuration information, VR-746

Cisco IOS Voice, Video, and Fax Commands: R Through Sh

show mgcp connection

Table 47 show mgcp connection Field Descriptions (continued)

(P)ort	The ports used for this connection. The first port is the local UDP port.
	The second port is the remote UDP port.
(M)ode	The call mode, where:
	0—An invalid value for mode.
	1—The gateway should only send packets.
	2—The gateway should only receive packets.
	3—The gateway can send and receive packets.
	4—The gateway should neither send nor receive packets.
	5—The gateway should place the circuit in loopback mode.
	6—The gateway should place the circuit in test mode.
	7—The gateway should use the circuit for network access for data.
	8—The gateway should place the connection in network loopback
	mode.
	9—The gateway should place the connection in network continuity
	test mode.
	10— The gateway should place the connection in conference mode.
	All other values are used for internal debugging.
(S)tate	The call state. The values are used for internal debugging purposes.
(C)odec	The codec identifier. The values are used for internal debugging
	purposes.
(E)vent [SIFL]	Used for internal debugging.
(R)esult [EA]	Used for internal debugging.

Related Commands	Command	Description
	mgcp	Starts the MGCP daemon.
	show mgcp	Displays general MGCP configuration information.
	show mgcp endpoint	Displays endpoint-specific MGCP configuration information.
	show mgcp statistics	Displays statistical MGCP configuration information.

Cisco IOS Voice, Video, Fax Command Reference

VR-746