Cisco IOS Voice, Video, and Fax Commands: R Through Sh show voice trunk-conditioning supervisory
VR-849
Cisco IOS Voice, Video, Fax Command Reference
show voice trunk-conditioning supervisory
To display the status of trunk supervision and configuration parameters for a voice port, use the show
voice trunk-conditioning supervisory command in user EXEC or privileged EXEC mode.
show voice trunk-conditioning supervisory [summary | voice-port]
Syntax Description
Command Modes User EXEC
Privileged EXEC
Command History
Usage Guidelines The show voice trunk-conditioning supervisory command displays the trunk supervision and
configuration status for analog and digital voice ports.
Examples The following is a sample display from the show voice trunk-conditioning supervisory summary
command for voice ports on a Cisco MC3810 multiservice concentrator:
Router# show voice trunk-conditioning supervisory summary
1/1 is shutdown
1/4 is shutdown
1/5 : state : TRUNK_SC_CONNECT, voice : on , signal : on ,slave
The following is a sample display from the show voice trunk-conditioning supervisory command for
voice port 1/5 on a Cisco MC3810 multiservice concentrator:
Router# show voice trunk-conditioning supervisory 1/5
1/5 : state : TRUNK_SC_CONNECT, voice : on, signal : on, slave
status: trunk connected
sequence oos : idle and oos
pattern :rx_idle = 0x0 rx_oos = 0xF tx_oos = 0xF
timing : idle = 0, restart = 0, standby = 0, timeout = 40
supp_all = 50, supp_voice = 0, keep_alive = 5
timer: oos_ais_timer = 0, timer = 0
summary (Optional) Displays a summary of the status for all voice ports on the
router or concentrator.
voice-port (Optional) Displays a detailed report for a specified voice port.
Release Modification
12.0(7)XK This command was introduced on the Cisco 2600 and 3600 series
routers, and the MC3810 multiservice concentrator.
12.1(2)T This command was integrated into the 12.1(2)T release.
12.1(3)T This command was first supported on the Cisco 2600 and 3600
series routers.