Cisco IOS Voice, Video, and Fax Commands: R Through Sh
show rudpv1
show rudpv1
To display Reliable User Datagram Protocol (RUDP) information, use the show rudpv1 command in privileged EXEC mode.
show rudpv1 { failures parameters statistics }
Syntax Description
Defaults
Command Modes
Command History
failures | RUDP failure statistics. |
|
|
parameters | RUDP connection parameters. |
|
|
statistics | RUDP internal statistics. |
|
|
No default behavior or values.
Privileged EXEC
Release | Modification |
12.1(1)T | This command was introduced. |
|
|
Usage Guidelines | Because the statistics counters are continually updated, the cumulative total may not be exactly equal to | |
| individual connection counters. After a connection is reset, previous statistics are lost, so the current | |
| connection statistics reflect only this instance of the RUDP | |
| Cumulative statistics reflect counts since the router was rebooted or since the last time the clear rudpv1 | |
| statistics command was issued. | |
| The following example shows sample output for show rudpv1 failures: | |
Examples | ||
| Router# show rudpv1 failures | |
| **** RUDPV1 Failure Stats **** | |
| CreateBufHdrsFailure | 0 |
| CreateConnRecsFailure | 0 |
| CreateEventQueueFailure | 0 |
| OsSpecificInitFailure | 0 |
| NotReadyFailures | 0 |
| OptionNotSupportedFailures | 0 |
| InvalidOptionFailures | 0 |
| OptionRequiredFailures | 0 |
| GetConnRecFailures | 0 |
| InvalidConnFailures | 0 |
| EventUnavailFailures | 0 |
| GetConnRecFailures | 0 |
| FindConnRecFailures | 0 |
| EmptyBufferSendFailures | 0 |
Cisco IOS Voice, Video, Fax Command Reference
