Cisco Systems VR-561

Cisco IOS Voice, Video, and Fax Commands: R Through Sh

show dialplan incall number

VR-714

Cisco IOS Voice, Video, Fax Command Reference

forward-digits 4

session-target = `', voice-port = `1/0/1:D',

direct-inward-dial = enabled,

digit_strip = enabled,

Connect Time = 0, Charged Units = 0,

Successful Calls = 0, Failed Calls = 0,

Accepted Calls = 0, Refused Calls = 0,

Last Disconnect Cause is "",

Last Disconnect Text is "",

Last Setup Time = 0.

Matched: Digits: 0

Target:

Table 3 6 describes the significant fields shown in the display.

Table36 show dialplan number Field Descriptions

Field Description

Macro Exp. Expected destination pattern for this dial peer.

VoiceEncapPeer Dial peer associated with the calling number entered.

tag Unique number identifying the dial peer.

destination-pattern Destination pattern (telephone number) configured for this dial

peer.

answer-address Answer address (calling number) configured for this dial peer.

preference Hunt group preference order set for this dial peer.

Admin state Describes the administrative state of this dial peer.

Operation state Describes the operational state of this dial peer.

incoming called-number Called number (DNIS) configured for this dial peer.

DTMF Relay Whether the dtmf-relay command is enabled or disabled for this

dial peer.

huntstop Whether the huntstop command is enabled or disabled for this dial

peer.

in bound application associated The IVR application that is associated with this dial peer when this

dial peer is used for an inbound call leg.

out bound application

associated The IVR application that is associated with this dial peer when this

dial peer is used for an outbound call leg.

type Type of dial peer (POTS or VoIP).

prefix The prefix number that is added to the front of the dial string before

it is forwarded to the telephony device.

forward-digits Which digits are forwarded to the telephony interface as configured

using the forward-digits command.

session-target Displays the configured session target (IP address or host name) for

this dial peer.

voice-port The voice port through which calls come into this dial peer.

direct-inward-dial Whether the direct-inward-dial command is enabled or disabled

for this dial peer.