Cisco IOS Voice, Video, and Fax Commands: R Through Sh
sgcp request retries
sgcp request retries
To specify the number of times to retry sending “notify” and “delete” messages to the Simple Gateway Control Protocol (SGCP) call agent, use the sgcp request retries command in global configuration mode. To restore the default value, use the no form of this command.
sgcp request retries count no sgcp request retries
Syntax Description |
| count | Specifies the number of times a “notify” and “delete” message |
|
|
| is retransmitted to the SGCP call agent before it is dropped. The |
|
|
| valid range is from 1 to 100. The default is 3. |
|
|
| |
|
|
|
|
Defaults |
| The default for the number of times a “notify” and “delete” message is retransmitted to the SGCP call | |
|
| agent before it is dropped is 3 |
|
Command Modes
Command History
Global configuration
Release | Modification |
12.0(5)T | This command was introduced in a private release on the |
| Cisco AS5300 universal access server only and was not |
| generally available. |
|
|
12.0(7)XK | Support for this command was extended to the Cisco MC3810 |
| multiservice concentrator and the Cisco 3600 series routers |
| (except for the Cisco 3620) in a private release that was not |
| generally available. |
|
|
12.1(2)T | This command was integrated into 12.1(2)T and was generally |
| available on the Cisco 3600 series router and the |
| Cisco MC3810 multiservice concentrator |
|
|
Usage Guidelines | The actual retry count may be different from the value you enter for this command. The retry count is |
| also limited by the call agent. If there is no response from the call agent after 30 seconds, the gateway |
| will not retry anymore, even though the number set using the sgcp request retries command has not |
| been reached. |
| The router will stop sending retries after 30 seconds, regardless of the setting for this command. |
| The following example shows the system configured to send the sgcp command 10 times before |
Examples | |
| dropping the request: |
| sgcp request retries 10 |
Cisco IOS Voice, Video, Fax Command Reference
