
Cisco IOS Voice, Video, and Fax Commands: R Through Sh
show ss7 mtp2 stats
show ss7 mtp2 stats
To display SS7 MTP 2 operational statistics, use the show ss7 mtp2 stats command in privileged EXEC mode.
show ss7 mtp2 stats [channel]
Syntax Description
channel | Specifies a channel from 0 through 3. |
Defaults | If you do not specify a channel, the command shows status information for channel 0. |
Command Modes
Command History
Privileged EXEC
Release | Modification |
12.0(7)XR | This command was introduced. |
|
|
12.1(1)T | This command was integrated into Cisco IOS |
| Release 12.1(1)T. |
|
|
Examples | The following example shows operations and maintenance (OM) statistics for MTP 2 channel 0. | |
| Table 57 explains some of the fields. | |
| Router# show ss7 mtp2 stats 0 | |
| SS7 MTP2 Statistics for | channel 0 |
| Protocol version for channel 0 is Japan NTT Q.703 Version | |
| OMIACAlignAttemptCount | = 0 |
| OMIACAlignFailCount | = 0 |
| OMIACAlignCompleteCount | = 0 |
| OMMSU_TO_XMIT_Count | = 0 |
| OMMSU_XMIT_Count | = 0 |
| OMMSU_RE_XMIT_Count | = 0 |
| OMMSU_RCV_Count | = 0 |
| OMMSU_Posted_Count | = 0 |
| OMMSU_too_long | = 0 |
| OMFISU_XMIT_Count | = 0 |
| OMFISU_RCV_Count | = 0 |
| OMLSSU_XMIT_Count | = 17 |
| OMLSSU_XMIT_SINCount | = 0 |
| OMLSSU_XMIT_SIECount | = 0 |
| OMLSSU_XMIT_SIOCount | = 0 |
| OMLSSU_XMIT_SIOSCount | = 17 |
| OMLSSU_XMIT_SIPOCount | = 0 |
| OMLSSU_XMIT_SIBCount | = 0 |
Cisco IOS Voice, Video, Fax Command Reference