Cisco Systems VR-561 Roaming dial-peer, Syntax Description Defaults Command Modes Command History

Cisco IOS Voice, Video, and Fax Commands: R Through Sh

roaming (dial-peer)

roaming (dial-peer)

Syntax Description

Defaults

Command Modes

Command History

To enable the roaming capability for the dial peer, use the roaming command in dial-peer configuration mode. To disable the roaming capability, use the no form of this command.

roaming

no roaming

This command has no arguments or keywords.

No roaming

Dial-peer configuration

Release	Modification
12.1(1)T	This command was introduced on the Cisco 2600 series and Cisco 3600
	series routers and on the Cisco AS5300 universal access server‘.

Usage Guidelines	Enable the roaming capability of a dial peer if that dial peer can terminate roaming calls. If a dial peer
	is dedicated to local calls only, disable the roaming capability.
	The roaming dial peer must work with a roaming service provider. If the dial peer allows a roaming user
	to go through, and the service provider is not roaming-enabled, the call fails.
	The following example enables the roaming capability for the dial peer:
Examples
	dial-peer voice 10 voip
	roaming
Related Commands	Command	Description
	roaming (settlement)	Enables the roaming capability for a settlement provider.
	settle-call	Limits the dial peer to using only the specific clearinghouse identified
		by the specified provider-number.
	settlement roam-pattern	Configures a pattern to match against when determining roaming.

Cisco IOS Voice, Video, Fax Command Reference

VR-584