Cisco Systems VR-561 manual VR-835

Cisco IOS Voice, Video, and Fax Commands: R Through Sh

show voice port

For the Cisco 2600 and 3600 Series Router with Analog Voice Ports:

slot/subunit/port	(Optional) Displays information for the analog voice port you
	specify with the slot/subunit/port designation.
	• slot specifies a router slot in which a voice network module
	(VNM) is installed. Valid entries are router slot numbers
	for the particular platform.
	• subunit specifies a voice interface card (VIC) where the
	voice port is located. Valid entries are 0 and 1. (The VIC
	fits into the voice network module.)
	• port specifies an analog voice port number. Valid entries
	are 0 and 1.
summary	(Optional) Displays a summary of all voice ports.

For the Cisco 2600 and 3600 Series Router with Digital Voice Ports:

slot/port:ds0-group	(Optional) Displays information for the digital voice port you
	specify with the slot/port:ds0-groupdesignation.
	• slot specifies a router slot in which the packet voice trunk
	network module (NM) is installed. Valid entries are router
	slot numbers for the particular platform.
	• port specifies a T1 or E1 physical port in the voice WAN
	interface card (VWIC). Valid entries are 0 and 1. (One
	VWIC fits in an NM.)
	• ds0-groupspecifies a T1 or E1 logical port number. Valid
	entries are from 0 to 23 for T1 and from 0 to 30 for E1.
summary	(Optional) Displays a summary of all voice ports.

For the Cisco MC3810 Multiservice Concentrator with Analog Voice Ports:

slot/port	(Optional) Displays information for the analog voice port you
	specify with the slot/port designation.
	• slot is the physical slot in which the analog voice module
	(AVM) is installed. The slot is always 1 for analog voice
	ports in the Cisco MC3810 multiservice concentrator.
	• port specifies an analog voice port number. Valid entries
	are from 1 to 6.
summary	(Optional) Displays a summary of all voice ports.

Cisco IOS Voice, Video, Fax Command Reference

VR-835