Cisco IOS Voice, Video, and Fax Commands: R Through Sh
show voice busyout
show voice busyout
To display information about the voice busyout state, use the show voice busyout command in privileged EXEC mode.
show voice busyout
Syntax Description This command has no arguments or keywords.
Defaults | No default behavior or values. |
Command Modes
Command History
Privileged EXEC
Release | Modification |
12.0(3)T | This command was introduced on the Cisco MC3810 multiservice |
| concentrator. |
|
|
12.0(7)XK | This command was first supported on the Cisco 2600 and 3600 series. |
|
|
12.1(2)T | This command was integrated into the 12.1(2)T release. |
|
|
Usage Guidelines | The show voice busyout command lists the following information: | ||
| • Interfaces that are being monitored for busyout events | ||
| • Voice ports currently in the busyout state and the reasons | ||
|
| ||
Examples | The following example displays the busyout information: | ||
| Router# | show voice busyout | |
| If following network interfaces are down, voice port will be put into busyout state | ||
| ATM0 |
|
|
| Serial0 |
|
|
| The following | voice ports are in busyout state | |
| 1/1 | is forced into busyout state | |
| 1/2 | is in | busyout state caused by network interfaces |
| 1/3 | is in | busyout state caused by ATM0 |
| 1/4 | is in | busyout state caused by network interfaces |
| 1/5 | is in | busyout state caused by Serial0 |
Cisco IOS Voice, Video, Fax Command Reference
