Note – Dynamic reconfiguration (DR) is a system-specific feature. If you have a Sun Enterprise system that supports DR, refer to the Sun Enterprise Dynamic Reconfiguration User’s Guide and your system’s documentation for further information about DR.

Installing the Adapter Without Dynamic Reconfiguration

To Install the Adapter

Note – The following instructions describe the basic tasks required to install the adapter. Refer to your system installation or service manual for detailed PCI adapter installation instructions.

1.Halt and power off your system.

2.Power off all of the peripherals connected to your system.

3.Open the system unit.

4.Attach the adhesive copper strip of the antistatic wrist strap to the metal casing of the power supply. Wrap the other end twice around your wrist, with the adhesive side against your skin.

5.Holding the PCI adapter by the edges, unpack it and place it on an antistatic surface.

6.Using a No. 1 Phillips screwdriver, remove the PCI filler panel from the slot in which you want to insert the PCI adapter.

Save the filler panel screw for Step 9.

7.Holding the PCI adapter by the edges, align the adapter edge connector with the PCI slot. Slide the adapter face plate into the small slot at the end of the PCI opening.

8.Applying even pressure at both corners of the adapter, push the PCI adapter until it is firmly seated in the slot.

8 Sun GigaSwift Ethernet Adapter Installation and User’s Guide • August 2004

Page 30
Image 30
Sun Microsystems GigaSwift Ethernet Adapter Installing the Adapter Without Dynamic Reconfiguration, To Install the Adapter

GigaSwift Ethernet Adapter specifications

The Sun Microsystems GigaSwift Ethernet Adapter is a high-performance network interface card that was designed to provide advanced connectivity solutions for enterprise environments. Launched in the early 2000s, this adapter caters to the increasing demands for speed and efficiency in networking, especially amidst the rise of data-intensive applications.

One of the standout features of the GigaSwift Ethernet Adapter is its capability to support gigabit Ethernet technology, delivering data transfer rates of up to 1 Gbps. This allows organizations to boost their network throughput significantly, ensuring that bandwidth-intensive applications, such as video conferencing, online collaboration, and large file transfers, can be handled without significant lag or disruption.

The adapter utilizes a PCI-X interface, which enhances its performance compared to traditional PCI interfaces. This allows for higher bandwidth operations, making the GigaSwift suitable for servers and workstations that require robust connectivity. It is backward compatible with earlier Ethernet standards, which means it can seamlessly communicate with existing network infrastructures, preserving investments in legacy technologies.

Another critical characteristic of the GigaSwift Ethernet Adapter is its support for various networking protocols. It is designed to operate in diverse networking environments, supporting both full-duplex and half-duplex modes, which maximizes its efficiency in data transmission. This flexibility makes it an ideal choice for heterogeneous networks where different devices and standards coexist.

Furthermore, the adapter features advanced error detection and correction technologies, ensuring reliable transmission of data over the network. With features such as flow control and jumbo frame support, it enhances the efficiency and performance of large-scale data transfers.

The GigaSwift also comes equipped with diagnostic and management utilities, allowing network administrators to monitor the network performance effectively. This is crucial for identifying bottlenecks and optimizing network configurations to ensure peak operational efficiency.

Overall, the Sun Microsystems GigaSwift Ethernet Adapter is an essential tool for businesses looking to upgrade their networking infrastructure. Its combination of speed, versatility, and reliability allows enterprises to adopt next-generation networking solutions while maintaining compatibility with existing systems, ultimately contributing to a more robust and efficient IT environment.