Note – If you are going to set the local-mac-address?variable, note the local MAC address of your device at this time. See “Setting the local-mac-address?Variable” on page 13 for more information.

5.Type the following when you finish looking at the .properties values:

ok device-end

Setting the local-mac-address?Variable

Note – Enabling the local-mac-address?variable is only required if you boot from the network. Setting the local-mac-address?variable is not supported in systems running Solaris 9 x86 software.

Every Sun GigaSwift Ethernet adapter comes with a unique media access control (MAC) address that represents the 48-bit Ethernet address for that interface.

A system with a a system-wide MAC address is not obligated to use this assigned MAC address. In such cases, the system-wide MAC address applies to all network interfaces on the system.

The local-mac-address?variable of the network device specifies the network address (system-wide or local-mac-address?) used for booting the system. If the local-mac-address?NVRAM variable is set to true, the system sets the MAC address for the network interface of the Sun GigaSwift Ethernet adapter to be the address provided by the adapter. If this variable is set to false, the system sets the MAC address for the adapter’s network interface to be the same as the system MAC address.

To start using the MAC address assigned to the network interface of the Sun GigaSwift Ethernet adapter, set the NVRAM configuration variable local-mac-address?to true.

ok setenv local-mac-address? true

▼To Set the Gigabit Ethernet Device as the Primary Boot Device

Use this procedure only if you want the Gigabit Ethernet device to be your primary boot device.

Chapter 2 Installing the Adapter 13

Page 34 Page 36
Page 35
Image 35
Sun Microsystems GigaSwift Ethernet Adapter manual Setting the local-mac-address?Variable, Ok device-end
Page 34 Page 36

GigaSwift Ethernet Adapter specifications

The Sun Microsystems GigaSwift Ethernet Adapter is a high-performance network interface card that was designed to provide advanced connectivity solutions for enterprise environments. Launched in the early 2000s, this adapter caters to the increasing demands for speed and efficiency in networking, especially amidst the rise of data-intensive applications.

One of the standout features of the GigaSwift Ethernet Adapter is its capability to support gigabit Ethernet technology, delivering data transfer rates of up to 1 Gbps. This allows organizations to boost their network throughput significantly, ensuring that bandwidth-intensive applications, such as video conferencing, online collaboration, and large file transfers, can be handled without significant lag or disruption.

The adapter utilizes a PCI-X interface, which enhances its performance compared to traditional PCI interfaces. This allows for higher bandwidth operations, making the GigaSwift suitable for servers and workstations that require robust connectivity. It is backward compatible with earlier Ethernet standards, which means it can seamlessly communicate with existing network infrastructures, preserving investments in legacy technologies.

Another critical characteristic of the GigaSwift Ethernet Adapter is its support for various networking protocols. It is designed to operate in diverse networking environments, supporting both full-duplex and half-duplex modes, which maximizes its efficiency in data transmission. This flexibility makes it an ideal choice for heterogeneous networks where different devices and standards coexist.

Furthermore, the adapter features advanced error detection and correction technologies, ensuring reliable transmission of data over the network. With features such as flow control and jumbo frame support, it enhances the efficiency and performance of large-scale data transfers.

The GigaSwift also comes equipped with diagnostic and management utilities, allowing network administrators to monitor the network performance effectively. This is crucial for identifying bottlenecks and optimizing network configurations to ensure peak operational efficiency.

Overall, the Sun Microsystems GigaSwift Ethernet Adapter is an essential tool for businesses looking to upgrade their networking infrastructure. Its combination of speed, versatility, and reliability allows enterprises to adopt next-generation networking solutions while maintaining compatibility with existing systems, ultimately contributing to a more robust and efficient IT environment.
Top Page Image Contents