RX

TX

FDX

LINK

FIGURE 1-1Sun GigaSwift Ethernet MMF Adapter

LED Displays on the MMF Adapter

Four LEDs are displayed on the front panel of Sun GigaSwift Ethernet MMF adapter. They are labeled on the front panel as shown in TABLE 1-1.

TABLE 1-1Front Panel Display LEDs for the MMF Adapter

Label

Meaning if Lit

Color

Source

 

 

 

 

LINK

Link is up.

Green*

MAC

FDX

Link is in full-duplex mode.

Green

MAC

TX

Link is transmitting.

Green

MAC

RX

Link is receiving.

Green

MAC

*LED will not light until the latest version of the driver software is installed.

Sun GigaSwift Ethernet UTP Adapter

The Sun GigaSwift Ethernet UTP adapter is a low-profile, single-port gigabit Ethernet copper-based PCI bus card. It can be configured to operate in 10, 100, or 1000 Mbit/sec Ethernet networks. At 10 or 100 Mbit/sec the adapter can be set to either half or full-duplex. At 1000 Mbit/sec, the adapter must operate at full-duplex.

2 Sun GigaSwift Ethernet Adapter Installation and User’s Guide • August 2004

Page 24
Image 24
Sun Microsystems GigaSwift Ethernet Adapter manual LED Displays on the MMF Adapter, Sun GigaSwift Ethernet UTP Adapter

GigaSwift Ethernet Adapter specifications

The Sun Microsystems GigaSwift Ethernet Adapter is a high-performance network interface card that was designed to provide advanced connectivity solutions for enterprise environments. Launched in the early 2000s, this adapter caters to the increasing demands for speed and efficiency in networking, especially amidst the rise of data-intensive applications.

One of the standout features of the GigaSwift Ethernet Adapter is its capability to support gigabit Ethernet technology, delivering data transfer rates of up to 1 Gbps. This allows organizations to boost their network throughput significantly, ensuring that bandwidth-intensive applications, such as video conferencing, online collaboration, and large file transfers, can be handled without significant lag or disruption.

The adapter utilizes a PCI-X interface, which enhances its performance compared to traditional PCI interfaces. This allows for higher bandwidth operations, making the GigaSwift suitable for servers and workstations that require robust connectivity. It is backward compatible with earlier Ethernet standards, which means it can seamlessly communicate with existing network infrastructures, preserving investments in legacy technologies.

Another critical characteristic of the GigaSwift Ethernet Adapter is its support for various networking protocols. It is designed to operate in diverse networking environments, supporting both full-duplex and half-duplex modes, which maximizes its efficiency in data transmission. This flexibility makes it an ideal choice for heterogeneous networks where different devices and standards coexist.

Furthermore, the adapter features advanced error detection and correction technologies, ensuring reliable transmission of data over the network. With features such as flow control and jumbo frame support, it enhances the efficiency and performance of large-scale data transfers.

The GigaSwift also comes equipped with diagnostic and management utilities, allowing network administrators to monitor the network performance effectively. This is crucial for identifying bottlenecks and optimizing network configurations to ensure peak operational efficiency.

Overall, the Sun Microsystems GigaSwift Ethernet Adapter is an essential tool for businesses looking to upgrade their networking infrastructure. Its combination of speed, versatility, and reliability allows enterprises to adopt next-generation networking solutions while maintaining compatibility with existing systems, ultimately contributing to a more robust and efficient IT environment.