Cisco IOS Voice, Video, and Fax Commands: R Through Sh
show rawmsg
VR-766
Cisco IOS Voice, Video, Fax Command Reference
show rawmsg
To show the raw messages owned by the required component, use the show rawmsg command in
privileged EXEC mode.
show rawmsg {all | tsp | vtsp | ccapi | h323}
Syntax Description
Defaults No default behavior or values.
Command Modes Privileged EXEC
Command History
Usage Guidelines The number displayed for show rawmsg all should be zero to indicate that there are no memory leaks.
Examples The following example shows how to display memory leaks from the telephony service provider:
Router# show rawmsg tsp
Related Commands
all All selections below.
tsp Telephony Service Provider subsystem.
vtsp Voice Telephony Service Provider subsystem.
ccapi API (Application Programming Interface) used to coordinate interaction
between application and call legs (telephony or IP).
h323 H.323 subsystem.
Release Modification
12.0(7)T This command was introduced on the Cisco AS5300 universal access server.
Command Description
isdn protocol-emulate Configures the Layer 2 and Layer 3 port protocol of a BRI voice port or a
PRI interface to emulate NT (network) or TE (user) functionality.
isdn switch type Configures the Cisco AS5300 universal access server PRI interface to
support Q.SIG signaling.
pri-group nec-fusion Configures your NEC PBX to support FCCS.
show cdapi Displays the CDAPI.