Cisco Systems VR-561 settlement roam-pattern

Cisco IOS Voice, Video, and Fax Commands: R Through Sh
settlement roam-pattern
VR-622
Cisco IOS Voice, Video, Fax Command Reference
settlement roam-pattern
To configure a pattern that must be matched to determine if a user is roaming, use the settlement
roam-pattern command in global configuration mode. To delete a particular pattern, use the no form of
this command.
settlement provider-number roam-pattern pattern {roaming | no roaming}
no settlement provider-number roam-pattern pattern {roaming | no roaming}
Syntax Description
Defaults No default pattern
Command Modes Global configuration
Command History
Usage Guidelines Multiple “roam patterns” could be entered on one gateway.
Examples The following example will configure a pattern that determines if a user is roaming:
settlement 0 roam-pattern 1222 roam
settlement 0 roam-pattern 1333 noroam
settlement roam-pattern 1444 roam
settlement roam-pattern 1555 noroam
Related Commands
provider-number Digit defining the ID of particular settlement server. The only valid entry is 0.
pattern Specifies a user account pattern.
roaming | no roaming Determines whether a user is roaming.
Release Modification
12.1(1)T This command was introduced on the Cisco2600 series and Cisco 3600
series routers and on the Cisco AS5300 universal access server.
Command Description
roaming (settlement) Enables the roaming capability for a settlement provider.
settlement Enters settlement configuration mode.