Cisco IOS Voice, Video, and Fax Commands: R Through Sh
show interface dspfarm
30887 packets input, 616516 bytes, 0 no buffer Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort 30921 packets output, 7868892 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 output buffer failures, 0 output buffers swapped out
Table 45 describes the significant fields shown in the display.
Table 45 show interface dspfarm Field Descriptions
Field | Description |
|
|
DSPfarm3/0 is up | DSPfarm interface is operating. The interface state can be up, |
| down, or administratively down. |
|
|
Line protocol is | Indicates whether the software processes that handle the line |
| protocol consider the line usable or if it has been taken down by |
| an administrator. |
|
|
Hardware | Version number of the hardware. |
|
|
MTU | 256 bytes. |
|
|
BW | 12000 Kbit. |
|
|
DLY | Delay of the interface in microseconds. |
|
|
Reliability | Reliability of the interface as a fraction of 255 (255/255 is |
| 100% reliability, calculated as an expediential average over 5 |
| minutes). |
|
|
Txload | Number of packets sent. |
|
|
Rxload | Number of packets received. |
|
|
Encapsulation | Encapsulation method assigned to the interface. |
|
|
Loopback | Loopback conditions. |
|
|
C549 DSP Firmware Version | The version of DSP firmware installed. |
|
|
DSP Boot Loader | DSP boot loader version. |
|
|
DSP Application | DSP application code version. |
|
|
Medium Complexity Application | DSP Medium Complexity Application code version. |
|
|
High Complexity Application | DSP High Complexity Application code version. |
|
|
Total DSPs | Total DSPs that are equipped in the PA. |
|
|
| DSP number range. |
|
|
Jukebox DSP id | Jukebox DSP number. |
|
|
Down DSPs | DSPs not in service. |
|
|
Total sig channels...used... | Total number of signal channels used. |
|
|
Total voice channels...used... | Total number of voice channels used. |
|
|
Active calls | Number of active calls. |
|
|
Max active calls | Maximum number of active calls. |
|
|
Total calls | Total number of calls. |
|
|
Rx packets | Number of received (rx) packets. |
|
|
Rx drops | Number of rx packets dropped at PA. |
|
|
Cisco IOS Voice, Video, Fax Command Reference
