Cisco Systems VR-561 manual Configures the time that a connection is maintained after a, VR-786

Cisco IOS Voice, Video, and Fax Commands: R Through Sh

show settlement

The following example shows transaction and state information about a specific settlement server:

Router# show settlement 0 transactions

Transaction ID=8796304133625270342 state=OSPC_GET_DEST_SUCCESS, index=0 callingNumber=5710868, calledNumber=15125551212

Table 54 describes the significant fields shown in the display. The provider attributes not configured are not shown.

.

	Table 54	show settlement Field Descriptions
	Field		Description
	type		Settlement provider type.
	address url		URL address of the provider.
	encryption		SSL encryption method.
	max-connections		Maximum number of concurrent connections to provider.
	connection-timeout		Connection timeout with provider (in seconds).
	response-timeout		Response timeout with provider (in seconds).
	retry-delay		Delay time between retries (in seconds).
	retry-limit		Number of retries.
	session-timeout		SSL session timeout (in seconds).
	customer-id		Customer ID, assigned by provider.
	device-id		Device ID, assigned by provider.
	roaming		Roaming enabled.
	signed-token		Indicates if the settlement token is signed by the server.
Related Commands	Command		Description
	connection-timeout		Configures the time that a connection is maintained after a
			communication exchange is completed.
	customer-id		Identifies a carrier or ISP with a settlement provider.
	device-id		Specifies a gateway associated with a settlement provider.
	encryption		Sets the encryption method to be negotiated with the provider.
	max-connection		Sets the maximum number of simultaneous connections to be used
			for communication with a settlement provider.
	response-timeout		Configures the maximum time to wait for a response from a server.
	retry-delay		Sets the time between attempts to connect with the settlement
			provider.
	session-timeout		Sets the interval for closing the connection when there is no input
			or output traffic.
	settlement		Enters settlement configuration mode and specifies the attributes
			specific to a settlement provider.
	type		Configures an SAA-RTR operation type.

Cisco IOS Voice, Video, Fax Command Reference

VR-786