Cisco Systems VR-561 manual Dtmf-relay, VR-609

Cisco IOS Voice, Video, and Fax Commands: R Through Sh

session target (VoATM)

Related Commands	Command	Description
	called-number	Enables an incoming VoFR call leg to be bridged to the correct POTS
		call leg.
	codec (dial-peer)	Specifies the voice coder rate of speech for a dial peer.
	cptone	Specifies a regional tone, ring, and cadence setting for an analog voice
		port.
	destination-pattern	Specifies either the prefix or the full E.164 telephone number
		(depending on your dial plan) to be used for a dial peer.
	dtmf-relay	Enables the DSP to generate FRF.11 Annex A frames for a dial peer.
	preference	Indicates the preferred selection order of a dial peer within a hunt
		group.
	session protocol	Establishes a VoFR protocol for calls between the local and the remote
		routers via the packet network.
	signal-type	Sets the signaling type to be used when connecting to a dial peer.

Cisco IOS Voice, Video, Fax Command Reference

VR-609