Cisco Systems VR-561 manual Show gatekeeper endpoints, VR-724

Cisco IOS Voice, Video, and Fax Commands: R Through Sh

show gatekeeper endpoints

show gatekeeper endpoints

Syntax Description

Defaults

Command Modes

Command History

To display the status of all registered endpoints for a gatekeeper, use the show gatekeeper endpoints command in EXEC mode.

show gatekeeper endpoints

This command has no arguments or keywords.

No default behavior or values.

EXEC

Release	Modification
11.3(2)NA	This command was introduced.
12.0(5)T	The display format was modified for H.323 Version 2.

Usage Guidelines Use this command to display the status of all registered endpoints for a gatekeeper.

Examples	The following is sample output from the show gatekeeper endpoints command:
	Router# show gatekeeper endpoints
	CallsignalAddr	Port	RASSignalAddr	Port	Zone Name	Type	F
	---------------	----	-------------	-----	----------	-----	--
	172.21.127.8	1720	172.21.127.8	24999	sj-gk	MCU
	H323-ID:joe@cisco.com
	172.21.13.88	1720	172.21.13.88	1719	sj-gk	VOIP-GW	O	H323-ID:la-gw

Table 40 describes the significant fields shown in the display.

Table 40 show gatekeeper endpoints Field Descriptions

Field	Description
CallsignalAddr	Call signaling IP address of the endpoint. If the endpoint is also
	registered with alias, a list of all aliases registered for that
	endpoint should be listed on the line below.
Port	Call signaling port number of the endpoint.
RASSignalAddr	Registration, admission, and status (RAS) protocol IP address
	of the endpoint.
Port	RAS port number of the endpoint.
Zone Name	Zone name (gatekeeper ID) that this endpoint registered in.

Cisco IOS Voice, Video, Fax Command Reference

VR-724