Cisco Systems VR-561 manual Show sgcp connection interface number, VR-787

Cisco IOS Voice, Video, and Fax Commands: R Through Sh

show sgcp connection

show sgcp connection

To see all active SGCP connections on this router, use the show sgcp connection command in EXEC mode.

show sgcp connection [interface number]

Syntax Description

Defaults

Command Modes

Command History

interface	(Optional) Specifies a DS1 interface.
number	(Optional) Specifies the T1 interface (controller) number. Valid
	values on the Cisco MC3810 multiservice concentrator are from
	0 to 1.
No default behavior or values.
EXEC
Release	Modification
12.0(5)T	This command was introduced in a private release on the
	Cisco AS5300 universal access server only and was not generally
	available.
12.0(7)XK	Support for this command was extended to the Cisco MC3810
	multiservice concentrator and the Cisco 3600 series routers
	(except for the Cisco 3620) in a private release that was not
	generally available.

Usage Guidelines	If you do not specify an interface, this command shows all the active SGCP connections on this host. If
	you specify an interface, this command shows only those active connections on the specified interface.
Examples	The following example shows the active connections on this router being displayed:
	Router# show sgcp connection
	Endpoint	Call_ID(C) Conn_ID(I) (P)ort (M)ode (S)tate		(E)vent[SIFL] (R)esult[EA]
	1. ds1-0/1@r3810-5		C=1,1,2 I=0x1 P=16492,16476 M=3	S=4 E=3,0,0,3 R=0, 0

The following example shows the state of SGCP on the router being displayed:

Router# show sgcp connection

SGCP Admin State DOWN, Oper State DOWN

SGCP call-agent: 209.165.200.225 , SGCP graceful-shutdown enabled? FALSE

SGCP request timeout 40, SGCP request retries 10

Table 55 describes the significant fields shown in the display.

Cisco IOS Voice, Video, Fax Command Reference

VR-787