Cisco IOS Voice, Video, and Fax Commands: R Through Sh
show cdapi
show cdapi
To display the Call Distributor Application Programming Interface (CDAPI), use the show cdapi command in privileged EXEC mode.
show cdapi
Syntax Description This command has no arguments or keywords.
Defaults | No default behavior or values. |
Command Modes
Command History
Privileged EXEC
ReleaseModification
12.0(7)T | This command was introduced on the Cisco AS5300 universal access server. |
|
|
Usage Guidelines | CDAPI is the internal application programming interface (API) that provides an interface between |
| signaling stacks and applications. |
| The following is output for the show cdapi command: |
Examples | |
| Router# show cdapi |
| Registered CDAPI Applications/Stacks |
| ==================================== |
| Application TSP CDAPI Application |
Application Type(s) | Voice Facility Signaling |
Application Level | Tunnel |
Application Mode | Enbloc |
Signaling Stack ISDN |
|
Interface Se023 |
|
Signaling Stack ISDN |
|
Interface Se123 |
|
Active CDAPI Calls |
|
==================
Interface Se023
No active calls. Interface Se123
Call ID = 0x39, Call Type = VOICE, Application = TSP CDAPI Application CDAPI Message Buffers
=====================
Used Msg Buffers 0, Free Msg Buffers 1600
Used Raw Buffers 1, Free Raw Buffers 799
Used
Cisco IOS Voice, Video, Fax Command Reference
