Cisco IOS Voice, Video, and Fax Commands: R Through Sh
show gateway
show gateway
Syntax Description
Defaults
Command Modes
Command History
To display the current gateway status, use the show gateway command in privileged EXEC mode.
show gateway
This command has no arguments or keywords.
No default behavior or values.
Privileged EXEC
Release | Modification |
11.3(6)NA2 | This command was introduced on the Cisco 2600 series and |
| Cisco 3600 series routers. |
|
|
12.0(5)T | This display format was modified for H.323 V2. |
|
|
Usage Guidelines | This command displays the current gateway status. | ||
|
| ||
Examples | The following example shows the report that appears when the gateway is not registered with a | ||
| gatekeeper: | ||
| Router# show gateway | ||
| Gateway gateway1 is not registered to any gatekeeper | ||
| Gateway alias list | ||
| |||
| H323 resource thresholding is Enabled but NOT Active | ||
| H323 resource threshold values: | ||
| DSP: Low threshold 60, High threshold 70 | ||
| DS0: Low threshold 60, High threshold 70 | ||
| This following example indicates that an E.164 address has been assigned to the gateway: | ||
| Router# show gate | ||
| Gateway gateway1 is registered to Gatekeeper gk1 | ||
| Gateway alias list | ||
| E.164 Number 5551212 | ||
| |||
| The following example shows the report that appears when the gateway is registered with a gatekeeper | ||
| and H.323 resource threshold reporting is enabled with the resource threshold command: | ||
| Router# show gateway | ||
| Gateway gateway1 is registered to Gatekeeper gk1 | ||
| Gateway alias list | ||
| Cisco IOS Voice, Video, Fax Command Reference |
|
|
|
| ||
|
|
|
|
