Cisco IOS Voice, Video, and Fax Commands: R Through Sh
show settlement
show settlement
To display the configuration for all settlement servers and see the specific provider and transactions, use the show settlement command in privileged EXEC mode. To reset to the default value, use the no form of this command.
show settlement
no show settlement
Syntax Description |
| (Optional) Displays the attributes of a specific provider. | |
|
| transactions | (Optional) Displays the transaction status of a specific provider. |
|
|
| |
|
|
|
|
Defaults |
| No default behavior or values. | |
Command Modes
Command History
Privileged EXEC
Release | Modification |
12.0(4)XH1 | This command was introduced on the Cisco 2600 series and Cisco 3600 |
| series routers and on the Cisco AS5300 universal access server. |
|
|
12.1(1)T | This command was integrated into Cisco IOS Release 12.1(1)T. |
|
|
Examples | The following example shows information about all settlement servers configured: | |
| Router# show settlement |
|
| Settlement Provider 0 |
|
| Type = osp |
|
| Address url = https://1.14.115.100:6556/ | |
| Encryption = all | (default) |
| Max Concurrent Connections = 20 (default) | |
| Connection Timeout = 3600 (s) | (default) |
| Response Timeout = 1 (s) | (default) |
| Retry Delay = 2 (s) | (default) |
| Retry Limit = 1 | (default) |
| Session Timeout = 86400 (s) | (default) |
| Customer Id = 1000 |
|
| Device Id = 1000 |
|
| Roaming = Disabled | (default) |
| Signed Token = on |
|
Number of Connections = 0
Number of Transactions = 7
Cisco IOS Voice, Video, Fax Command Reference
