Cisco IOS Voice, Video, and Fax Commands: R Through Sh
show vrm vdevices
Table 69 show vrm vdevices Field Descriptions (continued)
Field | Description | |
|
| |
Resource (vdev_common) | Current status of the VFC. Possible field values are: | |
status | • | FREE = 0x0000 |
| ||
| • | ACTIVE_CALL = 0x0001 |
| • | BUSYOUT_REQ = 0x0002 |
| • | BAD = 0x0004 |
| • | BACK2BACK_TEST = 0x0008 |
| • | RESET = 0x0010 |
| • | DOWNLOAD_FILE = 0x0020 |
| • | DOWNLOAD_FAIL = 0x0040 |
| • | SHUTDOWN = 0x0080 |
| • | BUSY = 0x0100 |
| • | OIR = 0x0200 |
| • HASLOCK = 0x0400 /* vdev_pool has locked port */ | |
| • | DOWNLOAD_REQ = 0x0800 |
| • | RECOVERY_REQ = 0x1000 |
| • | NEGOTIATED = 0x2000 |
| • | OOS = 0x4000 |
|
| |
tot ingress data | Total amount of data (number of packets) sent from the PSTN side | |
| of the connection to the Voice over IP (VoIP) side of the connection. | |
|
| |
tot ingress control | Total number of control packets sent from the PSTN side of the | |
| connection to the VoIP side of the connection. | |
|
| |
tot ingress data drops | Total number of data packets dropped from the PSTN side of the | |
| connection to the VoIP side of the connection. | |
|
| |
tot ingress control drops | Total number of control packets dropped from the PSTN side of the | |
| connection to the VoIP side of the connection. | |
|
| |
tot egress data | Total amount of data (number of packets) sent from the VoIP side of | |
| the connection to the PSTN side of the connection. | |
|
| |
tot egress control | Total number of control packets sent from the VoIP side of the | |
| connection to the PSTN side of the connection. | |
|
| |
tot egress data drops | Total number of data packets dropped from the VoIP side of the | |
| connection to the PSTN side of the connection. | |
|
| |
tot egress control drops | Total number of control packets dropped from the VoIP side of the | |
| connection to the PSTN side of the connection. | |
|
|
|
The following is sample output from the show vrm devices command specifying a summary list. In the “Voice Device Mapping” area, the “C_Ac” column indicates number of active calls for a specific DSP. If there are any nonzero numbers under the “C_Rst” and/or “C_Bad” column, this indicates that a reset request was sent but it was lost; this could mean a faulty DSP.
Router# show vrm vdevices summary
Cisco IOS Voice, Video, Fax Command Reference
