Toshiba r500 manual Dut, How to setup the REF PC

3Tests and Diagnostics 3.27 Wireless LAN Test Program (Intel-made b/g, a/b/g Setting up of REF PC)

3.27Wireless LAN Test Program (Intel-made b/g, a/b/g Setting up of REF PC)

For the test of Intel-made wireless LAN cards, configure the test environment as shown below with the following equipment.

・AP （which can operate on Windows XP and is corresponding to access point 11a, 11b and 11g）

NOTE: Set the SSID of AP as follows. (Note that upper case and lower case characters are recognized as different characters.)

AP for check of 11a : 11aAP

AP for check of 11b : 11bAP

AP for check of 11g : 11gAP

Make the security functions of AP (WEP, WPA, etc.) invalid.

・REF (Reference) PC

・Cross cable

・DUT (Device Under Testing)

DUT

(Device Under

Testing)

Cross cable

REF

(Reference PC)

11a(b,g)AP

Configuration of equipment for transmitting-receiving test

How to setup the REF PC

Set up the wireless LAN environment needed for the test before the start of Responder program on REF PC.

1.Copy the R100VWL5.ZIP (wireless LAN program for maintenance, common to Calexico, Golan and Kedron) to REF PC and unzip it. Then “Clx_Res” folder is created and the following three programs are copied in it.

•PACKET.SYS

•PACKET.INF

•WTWINSVR.EXE

3-62 [CONFIDENTIAL] PORTEGE R500 Maintenance Manual (960-634)