3 Tests and Diagnostics | 3.18 Error Code and Error Status Names |
Table
Device name | Error code | Error status name |
|
|
|
FDD | 01 | FDD - BAD COMMAND ERROR |
| 02 | FDD - ADDRESS MARK NOT FOUND |
| 03 | FDD - WRITE PROTECTED |
| 04 | FDD - RECORD NOT FOUND |
| 08 | FDD - DMA OVERRUN ERROR |
| 09 | FDD - DMA BOUNDARY ERROR |
| 10 | FDD - CRC ERROR |
| 20 | FDD - FDC ERROR |
| 40 | FDD - SEEK ERROR |
| 80 | FDD - TIME OUT ERROR |
| 60 | FDD - NOT DRIVE ERROR |
| 06 | FDD - MEDIA REMOVED |
| EE | FDD - WRITE BUFFER ERROR |
|
|
|
Printer | 01 | PRT - TIME OUT |
| 08 | PRT – FAULT |
| 10 | PRT - SELECT LINE |
| 20 | PRT - OUT OF PAPER |
| 40 | PRT - POWER OFF |
| 80 | PRT - BUSY LINE |
|
|
|
ASYNC | 01 | RS232C - [DTR ON] TIME OUT |
| 02 | RS232C - [CTS ON] TIME OUT |
| 04 | RS232C - [RX READY] TIME OUT |
| 08 | RS232C - [TX FULL] TIME OUT |
| 10 | RS232C - PARITY ERROR |
| 20 | RS232C - FRAMING ERROR |
| 40 | RS232C - OVERRUN ERROR |
| 80 | RS232C - LINE STATUS ERROR |
| 88 | RS232C - MODEM STATUS ERROR |
| 05 | SIR - TIME OUT ERROR |
| 06 | FIR - TIME OUT ERROR |
|
|
|
HDD | 05 | HDD - HDC NOT RESET ERROR |
| 07 | HDD - DRIVE NOT INITIALIZE |
| 09 | HDD - DMA BOUNDARY ERROR |
| 0B | HDD - BAD TRACK ERROR |
| BB | HDD - UNDEFINED ERROR |
| 08 | HDD - OVERRUN ERROR (DRQ ON) |
| 01 | HDD - BAD COMMAND ERROR |
| 02 | HDD - ADDRESS MARK NOT FOUND |
| 04 | HDD - RECORD NOT FOUND ERROR |
| 10 | HDD - ECC ERROR |
| 20 | HDD - HDC ERROR |
| 40 | HDD - SEEK ERROR |
| 80 | HDD - TIME OUT ERROR |
| 11 | HDD - ECC RECOVER ENABLE |
| AA | HDD - DRIVE NOT READY |
|
|
|
[CONFIDENTIAL] | PORTEGE R500 Maintenance Manual |
