3.28 Wireless LAN Test Program on DUT | 3 Tests and Diagnostics | |
Subtest03 | Antenna check & communication test of 11b mode |
|
This subtest execute transmitting/receiving test in 802.11b mode using the main antenna first. If a defective is not found during the test, transmitting/receiving test in 802.11b mode using the AUX antenna is automatically executed.
If a defective is not found during the test, OK message will appear in the display. Press any key and return to the test menu.
If a defective is found during the test, NG message will appear in the display. When pressing any key, the following message (which antenna is defective) is displayed
**************************************
* | * |
* Main Antenna Test : NG !! | * |
* | * |
**************************************
**************************************
* | * |
* Aux Antenna Test : NG !! | * |
* | * |
************************************** | |
| Press any key and return to the test menu. |
Subtest04 | Communication test of 11a mode |
| This subtest execute transmitting/receiving test in 802.11a mode using the |
| main antenna. |
| If a defective is not found during the test, OK message will appear in the |
| display. Press any key and return to the test menu. |
| If a defective is found during the test, NG message will appear in the display. |
| When pressing any key, the following message is displayed |
********************************************
* |
| * |
* | 11a Communication Test : NG !! | * |
* |
| * |
********************************************
Press any key and return to the test menu.
When a defective is detected in the test, following typical cause is considered.
•Connection of wireless LAN card
•Defective wireless LAN card
•Disappearance of MAC address data Checking the connection, execute the subtest again.
PORTEGE R500 Maintenance Manual | [CONFIDENTIAL] |
