Toshiba r500 manual Printer Test Tests and Diagnostics

3.11 Printer Test 3 Tests and Diagnostics

3.11 Printer Test

NOTE: Printer Test is not supported for this model.

To execute the Printer Test, select 6 from the DIAGNOSTIC TEST MENU, press Enter and follow the directions on the screen.

NOTE: An IBM compatible printer must be connected to the system to execute this test. Also, printer port wraparound connector must be connected.

The following message will appear, after selecting the subtest 01 to 03 of the printer test:

channel#1 = XXXXh channel#2 = XXXXh channel#3 = XXXXh

Select the channel number (1-3) ?

The printer I/O port address is specified by the XXXXh number. The computer supports three printer channels. Select the printer channel number, and press Enter to execute the selected subtest.

Subtest 01	Ripple pattern
	This subtest prints characters for codes 20h through 7Eh line-by-line while
	shifting one character to the left at the beginning of each new line.

PORTEGE R500 Maintenance Manual (960-634) [CONFIDENTIAL] 3-23