Toshiba r500 manual Removing the RTC battery

4 Replacement Procedures 4.11 RTC battery

4.11 RTC battery

Removing the RTC battery

To remove the RTC battery, follow the steps below and refer to Figure 4-14.

1.Disconnect the RTC battery cable from the connector CN9300 on the system board.

2.Remove the RTC battery holder fixed to the base cover with the double-sided tape.

CAUTION: A cushion is fixed to the bottom of the RTC battery holder with a double- sided tape and the cushion is fixed to the base cover with a double-sided tape. When removing the RTC battery holder, be careful not to break the cushion of the bottom of the RTC battery holder.

3.Open the RTC battery holder while peeling adhered portion with the double-sided tape and remove the RTC battery from the RTC battery holder.

CN9300

RTC battery holder

RTC battery cable

RTC battery

Figure 4-14 Removing the RTC battery

4-26 [CONFIDENTIAL] PORTÉGÉ R500 Maintenance Manual (960-634)