Toshiba r500 manual Removing the Touch pad/Fingerprint sensor board

4 Replacement Procedures 4.21 Touch pad/Fingerprint sensor board

4.21 Touch pad/Fingerprint sensor board

Removing the Touch pad/Fingerprint sensor board

To remove the touch pad/fingerprint sensor board, follow the steps below and refer to Figure 4-33 and 4-34.

1.Turn over the middle frame and disconnect the TP cable from the connector on the touch pad board.

2.Disconnect the FP cable from the connector CN9810 on the fingerprint sensor board.

3.Turn the middle frame face up and remove the touch pad adhered with the double- sided tape.

4.Remove the touch pad button adhered with the double-sided tape while releasing the latches.

Touch pad

FP cable Touch pad button

TP cable

CN9810

Latch

Touch pad board

Fingerprint sensor board

Figure 4-33 Removing the touch pad/fingerprint sensor board (1)

4-54 [CONFIDENTIAL] PORTÉGÉ R500 Maintenance Manual (960-634)