4 Replacement Procedures

4.14 HDD/SSD

4.14.12.5” HDD Removing the 2.5” HDD

To remove the 2.5”HDD, follow the steps below and refer to Figure 4-17.

1.Lift up the 2.5” HDD in the direction of the arrow in the figure below.

2.Disconnect the 2.5” HDD cable from the connector on the 2.5” HDD.

2.5” HDD

Connector of the 2.5” HDD

Guide x4

2.5” HDD cable

Figure 4-17 Removing the 2.5” HDD

Installing the 2.5” HDD

To install the 2.5” HDD, follow the steps below and refer to Figure 4-17.

1.Connect the 2.5” HDD cable to the connector on the 2.5” HDD.

2.Set the 2.5” HDD into the guides of the slot.

4-32

[CONFIDENTIAL]

PORTÉGÉ R500 Maintenance Manual (960-634)

Page 248
Image 248
Toshiba r500 manual 14.1 2.5 HDD Removing the 2.5 HDD, Installing the 2.5 HDD