Toshiba r500 manual Removing the DC-IN jack, Installing the DC-IN jack

4 Replacement Procedures 4.12 DC-IN jack

4.12 DC-IN jack

Removing the DC-IN jack

To remove the DC-IN jack, follow the steps below and refer to Figure 4-15.

1.Disconnect the DC-IN jack cable from the connector CN8800 on the system board and remove the DC-IN jack from the slot.

Insulator DC-IN jack

Guide

	CN8800
DC-IN jack cable

Figure 4-15 Removing the DC-IN jack

Installing the DC-IN jack

To install the DC-IN jack, follow the steps below and refer to Figure 4-15.

1.Set the DC-IN jack into the guide of the slot and connect the DC-IN jack cable to the connector CN8800 on the system board.

CAUTION: When installing a new DC-IN jack, stick a new insulator in place.

4-28 [CONFIDENTIAL] PORTÉGÉ R500 Maintenance Manual (960-634)