Toshiba r500 manual Removing the Memory module, Never press hard or bend the memory module

4 Replacement Procedures 4.5 Memory module

4.5Memory module

Removing the Memory module

CAUTION: The power must be turned off when you remove or insert a memory module. Inserting a memory module with the power on might damage the module or the computer itself. Dust and stains on the connectors may cause memory access problems.

Never press hard or bend the memory module.

To remove the memory module, make sure the computer is powered off, follow the steps below and refer to Figure 4-4 and 4-5.

1. Loosen the following screws and remove the memory cover.

• M2×4B STEP screw ×2

Memory cover

M2×4B STEP

Figure 4-4 Removing the memory module (1)

4-12 [CONFIDENTIAL] PORTÉGÉ R500 Maintenance Manual (960-634)