System Option Programming

Nineteen system options are provided so that you can configure the ER-290 to your exact requirements. Refer to the “System Option Table” on page 50 to review the system options. Read each option carefully to determine if you wish to make any changes.

NOTE: Because after clearing memory all options settings are automatically set to 0, and because your most likely option selections require a status setting of 0, you do not need to program this section unless you wish to change the default status.

Programming a System Option:

1.Turn the control lock to the PGM position.

2.Enter the option number of the system option you wish to change. Press the RECD ACCT key.

3.Enter the number representing the status you have selected. Press the PAID OUT key.

4.Repeat from step 3 for each system option you wish to change.

5.Press the CASH/TEND key to end programming.

System Option Flowchart

Repeat for each

System Option

RECD

PAID

CASH/

ACCT

OUT

TEND

Option #

Status

 

48 • Advanced Programming Instructions

ER-290 Electronic Cash Register

Page 54
Image 54
Samsung M-ER290 specifications System Option Programming, Programming a System Option, System Option Flowchart