Totaling a Charge Sale
1.Register the items you wish to sell.
2.Press CHARGE1:
CHA RGE1
3.The display will indicate “=” for total, the drawer will open and the receipt will print as in the example on the right.
Note: Charge tendering is not allowed.
YOUR RECEIPT
THANK YOU
0 3 - 0 1 - 1 9 9 9
1 . . . . . . 2 . 9 9 T 1 1 . . . . . . 2 . 9 9 T 1
*. . . . . . . . . 4 X @ . . . . . . 1 . 9 9 2 . . . . . . 7 . 9 6
*. . . . . . 5 . 9 8 T 1
*. . . . . . 0 . 3 6 T 1
*. . . . . 1 4 . 3 0 C 1
0 0 0 0 3 8
1 5 . 3 8 | 0 0 |
Check Cashing
Check cashing means exchanging cash for a check. Normally, this function is not allowed. If you wish to allow check cashing, you must set system option #15 to a value of 1. See “System Option Programming” on page 48.
1.Enter the amount of the check tendered by the customer. For example, for $20.00 enter:
2 0 0 0
2.Press CHECK TEND:
CHECK
TEND
3.The display will indicate “C” for change, the drawer will open and the receipt will print as in the example on the right.
YOUR RECEIPT
THANK YOU
0 3 - 0 1 - 1 9 9 9
*. . . . . 2 0 . 0 0 C H
*. . . . - 2 0 . 0 0 C A
0 0 0 0 3 9
1 5 . 3 9 | 0 0 |
38 • Advanced Operating Instructions |
